Bellevue, WA & the Eastside
Open 24/7 · (425) 845-0257
Plumber using leak detection equipment under a sink
24/7 Emergency Line Open
Diagnostics

Emergency Leak Detection in Bellevue, WA

Electronic leak tracing for slab leaks and hidden pipe damage, so we find the source before opening anything up.

Emergency Dispatch
Talk to a plumber(425) 845-0257
MethodNon-Invasive

Leak detection is the single most common call we get, and for good reason: a hidden leak rarely announces itself clearly. A warm spot on the floor, a slightly higher water bill, a faint sound of running water when nothing's turned on, these are all real signs, but none of them point to an exact location on their own.

We use acoustic and electronic leak detection equipment to trace the source without cutting into drywall, flooring, or concrete first. For a slab leak specifically, that means finding the exact point under the foundation before any demolition happens, which saves real money compared to opening up a large section of slab to search.

We also handle leak detection for irrigation systems, which fail differently than household plumbing and often show up first as an unexplained wet patch in the yard rather than an indoor sign. Since irrigation lines are typically shallower and more accessible than a home's main supply lines, detection and repair on these is usually faster and less invasive.

We also perform leak detection as part of a pre-purchase inspection for homebuyers who want confidence in a property's plumbing before closing, since a hidden leak is exactly the kind of issue a standard visual home inspection can miss entirely. For an older Bellevue home with galvanized supply lines, this extra step can surface a problem while there's still room to negotiate, rather than discovering it as a new owner a few months after moving in.

Call (425) 845-0257 ☎

Emergency Response

Emergency Leak Detection When Water Is Actively Escaping

Some leaks cannot wait for a convenient appointment. Water coming through a ceiling, pooling in a yard, or rising through a floor needs its source found quickly, and our emergency line is answered around the clock.

Start by shutting off the main valve. Then call us so we can trace the leak with electronic equipment before anyone opens a wall or digs up a yard.

Call (425) 845-0257 ☎

When You Know There's A Leak But Can't See One

The most common call we get on this is a water bill that's climbed without an obvious reason, or a water meter that keeps running even with every fixture in the house off. Neither tells you where the leak is, only that one exists. That's exactly what leak detection equipment is for: finding the source without guessing or opening up walls and flooring on a hunch.

What's Included

How We Find It

Acoustic Detection
Pressure Testing
Pinpoint Location

Acoustic Detection

Listens for the sound signature of water escaping under pressure, even behind walls or under slab.

Method
Non-Invasive

Pressure Testing

Isolates sections of the system to narrow down which line is actually leaking.

Used For
Whole-System Leaks

Pinpoint Location

Marks the exact spot before any cutting or excavation, so repair work is targeted.

Outcome
Exact Location
Local Neighborhoods

Finding Hidden Leaks In Older Homes And Towers

Homes in Lake Hills and Crossroads from the 1950s and 1960s can have slab floors or low crawlspaces, so a leak can hide for months. The usual clue is a water bill that climbs with no visible cause, or a warm spot on a floor. In Downtown and BelRed buildings, a leak can travel along a ceiling before it shows, so the source may be several units away from the stain.

Pricing

What Affects The Price

Leak detection is priced by how extensive the search needs to be, not by guesswork, and the number is separate from whatever repair follows once the source is found.

Type of leak

A slab leak typically takes longer to trace than a leak in an accessible wall or crawlspace.

System size

A larger home with more plumbing runs takes longer to isolate the affected section.

Access

Finished spaces without easy access to plumbing take more time than an open crawlspace or basement.

Before We Arrive

Signs Worth A Leak Detection Call

  • A water bill that's risen without a clear reason, or a change in usage habits.
  • A water meter that keeps moving even with every fixture in the house off.
  • A warm or damp spot on the floor, especially over a slab foundation.
  • A faint sound of running water when nothing is turned on.
High Bill Or Running Meter

A Running Water Meter Or A High Water Bill

Two clues bring in more leak detection calls than any others, a water bill that jumped and a meter that keeps moving. Bellevue's electronic meters show a FLOW icon when water is moving through them. If every fixture is off and FLOW still shows, you may have a leak.

Bellevue Utilities says the meter shows LEAK once water has flowed nonstop for 24 hours, and it takes a full hour without flow for that message to clear. The utility's customer portal also shows hourly usage and sends leak alerts, which helps you see when the water started running.

Once the meter confirms water is moving, we trace whether the leak is inside the house, in the irrigation system, or on the line between the meter and the house.

Under The Floor

Slab Leaks: Water Under The Floor

A slab leak is a break in a supply line that runs under a concrete floor. Common signs are a warm spot on the floor, the sound of running water with everything off, damp flooring, or water seeping up through concrete in a garage or driveway.

We use acoustic and electronic tracing to mark the leak on the floor before any concrete is cut. That lets us explain your options first, a targeted repair at the marked spot or rerouting the line. Our slab leak detection guide walks through a typical visit.

Meter To House

Leaks On The Line Between The Meter And The House

Bellevue Utilities says leaks at or beyond the point where your line connects to the city's system are the customer's responsibility. That includes the buried service line that runs from the meter to the house, which is easy to miss.

Clues include a soft or swampy patch of yard, water around the meter box, or a meter that keeps running with the house shut off. We locate the leak along the line so a repair or replacement can be scoped properly. Ask Bellevue Utilities whether a leak adjustment applies and what proof of repair it needs.

Out Of Sight

Leaks In Ceilings, Walls And Crawlspaces

A stained ceiling under a bathroom, a bubbling wall, or a damp crawlspace usually points to a supply or drain line leaking out of sight. The wet spot is often not where the leak starts, because water travels along framing and pipe before it shows.

We trace the wet area back to its source with moisture readings and electronic tracing, so the repair opens one small section instead of a whole wall. If drywall or insulation has already soaked, we will tell you when water damage restoration should follow.

Outdoors

Irrigation, Buried Lines, Pools And Spas

Leaks outside the house are common calls too. A sprinkler zone that runs weakly, a patch of wet ground, or a buried line that cannot be found can each hide a break.

We trace irrigation lines, buried water lines, and the supply lines to pools, spas and hot tubs. For a leak in a pool shell itself, a pool specialist may be the better call, and we will say so.

Related Services In Bellevue

You Might Also Need

Once a leak is located, the repair itself depends on where it is. A slab leak often becomes a rerouting conversation covered on our repiping and pipe replacement page, while a leak in an accessible wall is usually a straightforward burst pipe repair. If the leak has already caused visible damage, our water damage restoration page covers the cleanup.

Newcastle homes near the higher water table close to Lake Washington see leak detection calls for a similar reason: shifting soil conditions near the shoreline can stress buried supply lines over time.

Common Questions

Leak Detection FAQ

We use acoustic and electronic equipment that traces the sound and pattern of water escaping under pressure, which pinpoints the location before any cutting or excavation happens.

That's one of the most common reasons people call us. A rising bill with no visible leak usually means the leak is hidden, behind a wall, under a slab, or underground between the meter and the house, and it's worth a proper detection visit rather than waiting.

Detection itself typically isn't a covered expense, but if the leak has caused sudden water damage, that portion may be covered depending on your policy. We can document findings either way.

Yes, irrigation leak detection is a routine part of what we do, and it's often quicker to resolve than a leak in the home's main supply lines since irrigation runs tend to be shallower and more accessible.

Yes, this is a common request for older homes with galvanized plumbing, where a hidden leak might not show up on a standard visual inspection but is worth knowing about before closing.

Yes. Our emergency line is answered 24 hours a day. If water is actively escaping, shut off the main and call us, and we dispatch from Bellevue to trace the source.

Bellevue Utilities says the meter displays LEAK when water has flowed continuously for at least 24 hours. It clears after a full hour without flow. A FLOW icon with every fixture off is an earlier warning.

Yes. Offices, retail space, apartment buildings and shopping plazas can have long hidden pipe runs. See our commercial plumbing page for how we work with property managers.

Coverage Area

Serving Bellevue & the Eastside

Need A Plumber In Bellevue?

Call now and talk to a real person, day or night.

Call (425) 845-0257
Call (425) 845-0257 Now ☎
☎